Gemini Propus Integrated MTB Handlebar

$849.99

SKU N/A Category Brand:

Long VOSTOK – computer mount for the Gemini integrated bar included.

Decal Colors: gold, black, copper, yellow, orange, red, blue, green, pink, holographic.

Stem Lengths of 90mm & 10mm are only available in + 3mm or – 25mm offset.

GEMINI Products are hand-built to order. Most orders are completed in3-4 weeks.

Reach out to us for any questions.

Description

Gemini Propus Integrated MTB Handlebar – A Work of Engineering for XC Racing Bikes

DESIGNED AND MANUFACTURED IN BARCELONA TO MAKE THE MOST OF XC RACES

The Gemini Propus Integrated MTB Handlebar is not just another XC bar—it is the result of hours of engineering to create an ultra-light and ultra-resistant handlebar. Its unibody design and the materials used to produce it will allow you to fly over the terrain.

A SPECIFIC UNIBODY DESIGN FOR CROSS-COUNTRY MOUNTAIN BIKES

The Gemini Propus Integrated MTB Handlebar is a handlebar developed for you to be able to climb faster, provide you with comfort in the most broken areas, and increase your control in the technical descents with maximum integration and a simple and neat aesthetic.

From 149 g.* OF PURE ENGINEERING AND RESISTANCE

The Gemini Propus Integrated MTB Handlebar is an ultra-light handlebar not just because we have decided to remove some material—each layer has been studied and optimized to perform at the highest level. Together with its unibody design, this bar offers unique resistance, one that cannot be compared with any conventional handlebar.

*5% range of tolerance

NO ASSEMBLY STRESSES

By eliminating the joint between the stem and the handlebar, stresses caused by assembly preloads have been taken away, preventing the handlebar from being slippery, and also eliminating the areas subject to compressions that warp the handlebar and are conducive to the delamination of the fiber layers, decreasing resistance.

STRESS DISTRIBUTION

The continuity of the material between the stem and the handlebar eases stress distribution over a larger area, so that the stresses flow along the handlebar, eliminating high-stress areas and, thus, increasing its final resistance.

GMN SECTION

The circular cross-sections perform equally in all directions, this is why we have developed the GMN section with two basic purposes: decreasing hand fatigue arising from vibrations and forces, and increasing reactivity and control when turning.

VERTICAL ABSORPTION

By reducing the vertical section we have achieved an increased absorption of vertical impacts and vibrations, this translates into less hand fatigue and being able to keep a high speed of descent.

TURNING REACTIONS

By enlarging the horizontal section we have managed to increase the rigidity of the handlebar against any force exerted by the pilot when turning, this translates into a more direct and reactive steering control.

INTEGRATION DOWN TO THE LAST DETAIL

We have integrated the most visible part of the bike as much as possible, using our cap that, with its exclusive design, hides the upper bolt, leaving an orifice to insert only a Torx wrench to tighten it and, thus, providing a cleaner look to the cockpit.

OPTIMIZED GEOMETRY FOR XC WITH RAKES OF 50, 60, 70, 80, 90, AND 100 mm.

Its geometry has been developed specifically for XC MTB racing, to lower your center of gravity and give you maximum control in the most technical climbs, as well as in the most broken descents.

GEOMETRY FOR XC RACING MOUNTAIN BIKES

The Gemini Propus Integrated MTB Handlebar is specially designed to be implemented in bicycles with a steering angle between 67 and 70 degrees, its entire geometry is designed to work in that position and provide you with increased control and absorption.

LOWERED POSITION

With a racing position thanks to its negative 12 mm. in all lengths, which will allow you to lower the center of gravity and bear more weight on the front wheel, so you can tackle any descent.

MADE FROM THE BEST CARBON FIBER OF INTERMEDIATE MODULUS

The Gemini Propus Integrated MTB Handlebar is made from the best carbon fiber currently available on the market, Mitsubishi MR70, with an optimized lay-up to help you withstand riding your bike for hours, providing you with more comfort and safety.

PUT THROUGH THE MOST DEMANDING TESTS

The Gemini Propus Integrated MTB Handlebar has been tested in the laboratory and on the terrain, passing highly demanding tests of resistance. Thanks to its unibody design and the material used to produce it, it offers a unique resistance, making it an optimized piece for racing.

Check out the GEMINI website for more info on the brand.

 

Additional information

Weight 15 oz
Dimensions 30 × 10 × 10 in
Size

100mm, 50mm, 60mm, 70mm, 80mm, 90mm

Offset

+3mm, -12mm, -25mm

Lamination

XC, UD

Carbon Layup

12K, UD

Finish

MATTE, GLOSS

Decals

Custom

Reviews

There are no reviews yet.

Be the first to review “Gemini Propus Integrated MTB Handlebar”

Your email address will not be published.

seven − two =